Fraud Blocker
CM dealer in Teague, TX

CM Service Bodies and Utility Beds for Sale in Texas

CM service bodies trade an open deck for locking compartments, and 3W Truck Beds sells and installs five of them: the SB steel and SBA aluminum service bodies, the CB and CBA component bodies, and the CR crane body. We mount and wire every one at our shop on Hwy 84 in Teague, TX.

Call or text a bed expert: (254) 739-5483

896 U.S. Hwy 84 W · Teague, TX 75860 · Halfway between Dallas & Houston, minutes off I-45

Spec sheets, side by side

CM Service Bodies Compared

From each CM spec sheet and model page.

FeatureSBSBACBCBACR Crane
Material16 ga galvanneal steelAluminum16 ga galvanneal steelAluminumA60 galvanneal and high-tensile steel
ConstructionWelded topsWelded topsBolted panelsBolted panelsReinforced multi-panel doors
Deck.125" treadplate steel.125" treadplate aluminum12 ga galvanneal, Black Lava3/16" aluminum, Black Lava3/16" steel
Frame rails12 ga bed delete, 10 ga cab chassis3/16" aluminum12 ga bed delete, 10 ga cab chassis3/16" aluminumNot listed
Toolboxes6 integrated6 integrated6 integrated6 integratedCompartments, compression latches
RearBolt-on hitch optional (cab chassis)Vise socket; bolt-on hitch optionalBolt-on hitch optional (cab chassis)Vise socket; bolt-on hitch optionalOptional workbench bumper, 24,000 lb receiver
Tie-downs4 integrated loops4 integrated loops4 integrated loops4 tiedown loops6 cargo floor tiedowns
Lengths76" to 134"76" to 134"76" to 134"76" to 134"108", 132"

The six standard lengths for the SB, SBA, CB and CBA are 76", 81", 82", 98", 110" and 134". A headache rack is optional on all five.

Choose with confidence

Which CM Service Body Fits Your Work?

Daily service truck: SB or SBA

Six compartments, welded tops and a treadplate deck. Steel SB in 16 gauge galvanneal, or aluminum SBA to save weight, with a rear vise socket for a mobile workbench.

Fleets that get dinged up: CB or CBA

Component bodies bolt together instead of being welded as one piece, so a damaged panel can be replaced and the layout can change with the job. CB in steel, CBA in aluminum.

Lifting work: CR Crane Body

Built from A60 galvanneal and high-tensile steel with a 3/16" deck for crane work, in 108" and 132" lengths, with an optional rear workbench bumper and 24,000 lb receiver.

Fitment

Pickup or Cab and Chassis: Will a Service Body Fit?

CM builds the SB and CB frames two ways: 12 gauge for a bed delete pickup, and 10 gauge for a cab and chassis truck.

A bed delete means we take the factory bed off a pickup and mount the service body in its place. A cab and chassis truck comes from the factory with no bed at all, and that's also where the optional bolt-on bumper hitch applies. The SB, SBA, CB and CBA each include a mounting kit. Send us your year, make, cab, wheel setup and cab-to-axle, and we'll match the right length before anything is ordered. Need an open deck instead? See CM skirted truck beds or aluminum flatbeds.

Pricing, financing, install

CM Service Body Price and Installation

Service body pricing depends on the model, the length, the options and your truck. One call gets you a quote for the body and the installation together.

Financing is available. We install service bodies at our shop in Teague: the old bed comes off, the body is mounted and wired, and the truck goes back to work, usually the same day.

Step One

Tell us the truck and the trade

What you carry decides the layout.

Step Two

Match the body and length

We quote the body and install as one number.

Step Three

Install at our shop

Most single installs are done in a day.

Straight answers

CM Service Body FAQs

What is the difference between a service body and a utility bed?
They usually mean the same thing: a truck body with locking compartments along the sides instead of an open deck. CM calls them service bodies. The SB, SBA, CB and CBA each have six integrated toolboxes.
What is a CM component body?
The CB and CBA are bolted together from panels instead of being welded as one piece. That makes repairs, upgrades and layout changes easier. The CB is galvanneal steel and the CBA is aluminum, and both have a Black Lava coated deck.
Is the SBA lighter than the SB?
The SBA is the aluminum version, with a 3/16" aluminum frame and a .125" treadplate aluminum deck, so it is built to save weight compared with the 16 gauge galvanneal steel SB. CM's spec sheets on our site don't list body weights, so call us for the weight of the length you need.
Do you have a utility bed with a crane?
Yes. The CM CR Crane Body is built for crane work from A60 galvanneal and high-tensile steel, with a 3/16" steel deck, six cargo floor tiedowns and an optional workbench bumper with a 24,000 lb receiver hitch. It comes in 108" and 132" lengths.
Do you install CM service bodies?
Yes. We install every body we sell at our shop in Teague, TX, and most single installs are done in one day when they're scheduled ahead. Call or text (254) 739-5483.
CM dealer near you

Your CM Service Body Dealer Between Dallas and Houston

3W Truck Beds is on Hwy 84 in Teague, TX, minutes off I-45. Contractors and service crews come to us from Waco, Tyler, Corsicana, Palestine, Fairfield, Mexia and across Central and East Texas.

Call ahead and we'll confirm the body you want is in stock. See the full CM truck bed lineup, or compare Norstar truck beds, which include Norstar service beds.

Ready to build

Find the Right Service Body for Your Truck

Talk to a real bed expert, get matched to the right model, and schedule your install.

(254) 739-5483
3W Truck Beds
896 U.S. Hwy 84 W.
Teague, TX 75860
Monday to Friday business hours · Call ahead to schedule installs

Specs from the CM spec sheets on each model page, reviewed November 2026 · Inventory changes often, so call to confirm current stock.